Miura tail logo

The point of this page is to establish the correct position of the tail logos on a Miura
Application
Graphic


Miura #1 prototype
right side, certain amount below deck lid, certain distance from tailight.
No Lamborghini tail logo.


Miura #2 prototype
right side, reasonable position for early prototype

Miura #9 prototype
right side, reasonable position on an early prototype.

Note- period photos do support a special case for Miura logo position to the right as shown for prototypes.

Miura #54 production
right side Miura script is correct position.
Lamborghini logo to left in correct position, but not correct to be on this early Miura.

Miura#119 production
right side Miura script is correct position.
notice backup light peeking from behind grille in center.
of course missing all the correct license light hardware.

Miura #25x production
unrestored car, both logos correct position and use.

Miura #274 production
unrestored car, both logos correct position and use.

Miura #285 production early S model
Both scripts in correct positions, the S looks a little vertical and upside down, so when flipped may come to look as it should.

Miura #298 early S model
looks very nice, correct scripts, but all scripts in the wrong locations.
license plate and lights moved to an SV position.
license now covers backup light.

Miura #326 early S model
correct scripts in correct locations.
license correct, license lights correct

Miura#550 late S model
correct scripts in the correct positions.
S in upsidedown position.
license moved and now the license covers the backup light.


Miura #593 late S model
looks very nice, correct scripts, but all scripts in the wrong locations.
S in upsidedown position
license plate and lights moved to an SV position.
license now covers backup light.

Miura #688 production mid series SV model
unrestored car appears with correct positions.
backup lights are part of tail light assembly.

Miura #708 late SV production
looks very nice, but all scripts in the wrong locations.
S script incorrect.


Hole pattern for the basic logo positions for P400 and P400S
I would like verification from other resources.
I need the pattern for the S model S logo
I need the pattern for the SV basic holes
I need the pattern for the SV model S logo
I need the pattern for the SV model V logo